Spindle taper | 7:24 ISO 50(Horizontal/Vertical) |
Worktable size | 1700X400mm |
Worktable swivel angle | ±45° |
The max.weight on worktable | 1000 kgs |
T-slots Number-table Width -Distance | 4-18mm-100mm |
Spindle speeds range | 12 steps 50-1520r.p.m(Vertical) 12 steps 60-1850r.p.m (Horizontal) |
Table travel Longitudinal/Cross/Vertical | 1300mm/420mm/600mm |
X.Y.axes feeding | 8steps25-800mm/min Rapid feeding 800mm/min |
Z axes feeding | 8 steps 8-267mm/min Fast forward 267mm/min |
Distance from spindle hole center to worktable surface main horizontal spindle |
0-440mm |
milling head horizontal (low position) | 150-590mm |
milling head horizontal(side position) | 340-780mm |
milling head horizontal (high position) | 530-970mm |
Distance from spindle nose to worktable surface | 50-650mm(Vertical) |
Distance from Vertical spindle center to guideway surface | 0-1000mm(Vertical milling spindle head) |
vertical swivel angle of milling head | 360° |
Main motor | Vertical Milling 7.5KW (Vertical) Horizontal Milling 5.5KW (Horizontal) |
Feeding motor (Servo motor) | 2.36KW 15N.M |
Coolant pump motor | 90W |
Coolant pump flux | 25 Litres/minute |
Overall dimensions | 2300X2300X2270mm |
G.W | about 3600kg |