|
Specification turret milling machine |
PTX1668 |
|
Spindle taper |
ISO 40 Vertical ISO50 Horizontal |
|
Spindle travel |
127mm |
|
Spindle speed vertical |
16steps 65--4500 rpm 50hz 80-5440 rpm 60Hz |
|
Auto quill feed |
0.04,0.08,0.15/0.0015”, 0.003”, 0.006” |
|
Spindle head swivel left and right |
90 degree |
|
Worktable size |
1700X400mm |
|
Worktable swivel angle |
±45° |
|
The max.weight on worktable |
1000 kgs |
|
T-slots Number-table Width -Distance |
4-18mm-100mm |
|
Table travel Longitudinal/Cross/Vertical |
1300mm/420mm/600mm |
|
X.Y.axes feeding |
8steps25-800mm/min Rapid feeding 800mm/min |
|
Z axes feeding |
8 steps 8-267mm/min Fast forward 267mm/min |
|
Distance from spindle hole center to worktable surface main horizontal spindle |
0-440mm |
|
milling head horizontal (low position) |
150-590mm horizontal |
|
milling head horizontal(side position) |
340-780mm horizontal |
|
milling head horizontal (high position) |
530-970mm horizontal |
|
Distance from spindle nose to worktable surface |
50-650mm（Vertical） |
|
Distance from Vertical spindle center to guideway surface |
0-1000mm（Vertical milling spindle head） |
|
Main motor |
Vertical Milling 4 KW (Vertical) Horizontal Milling 5.5KW （Horizontal） |
|
Feeding motor (Servo motor) |
2.36KW 15N.M |
|
Coolant pump motor |
90W |
|
Coolant pump flux |
25 Litres/minute |
|
Overall dimensions |
2300X2300X2270mm |
|
G.W |
about 3600kg |
